ACUPATCH Deluxe Repair Kit Desert Sand
2 X the amount of ACUPATCH repair kits neatly packed in a ACU Camo Double Mag Pouch. The ACUPATCH Deluxe Repair Kit provides two ACUPATCH Repair Kits in ACUPAT / Desert Sand so you can make sure all your ACUPAT / Desert Sand Reversible Field Tarps are in tip top shape.
Pull that duct tape off your ACUPAT Reversible Field Tarp and upgrade to Smith’s Surplus ACUPATCH Tarp Repair Kit. ACUPATCH Tarp Repair Kit patches are made from real USGI ACUPAT Field Tarp. Repairs will blend in perfectly without any tape residue or patches that stand out.
The ACUPATCH Repair Kit instruction insert doubles as an adhesive spreader. Tear along the perforation and use the piece to spread the Repair Kit Adhesive. The 1” disc MARPAT patches are great for small pinholes. Glue doubles as a seam sealer. Adhesive will even work underwater! Bonds in minutes fully cured in 24 hrs. Adhesive remains flexible in freezing and hot conditions. Re-use the test tube for storing small items.
- Color: ACU / Desert Sand
- Crush proof test tube case
- Instruction Insert / adhesive spreaders
- 24 x 1″ Disc / Dot Patches
- 8 x 4″ x 2″ Rectangular Patches
- 4 x 6″ x 3.25″ Large Rectangular Patches
- 2 x .85fl.oz / 25ml Adhesive
Also available in ACUPAT / Foilage Green
ACUPATCH Repair Kit Instructions:
All surfaces should be clean and free of dirt, grease and oil. Best if used between 50°F and 90°F. Use in a well ventilated area. Avoid breathing adhesive vapors and prolonged contact with your skin. We found that Isopropyl rubbing alcohol works really well to clean the patch area. Chemical cleaners may damage the urethane coating on the tarp. Always test cleaner in small area.
1. Apply adhesive to each surface to be bonded.
To maximize bond strength: Wait approximately two minutes for adhesive to partially dry before joining surfaces.
2.Press surfaces firmly together.
NOTE: Bond forms immediately and can be difficult to reposition. Cure Time Dry to touch in 5-10 minutes. Allow for a minimum of 24 hours for full cure. Cure time may increase with lower temperatures when used on non-porous surfaces.
After each use, wipe nozzle with a dry cloth and tightly replace cap. Store in a cool, dry location. Tip: For easier re-opening, apply a thin coat of petroleum jelly to the threads before replacing cap. Store away from children and animals.
Wipe uncured adhesive with a dry cloth. **Warning chemical cleaners may damage the urethane coating used on the ACUPAT Reversible Field Tarp.