Call or Text (845) 218-0943

SMITH’S SURPLUS | BUILD YOUR LOADOUT

MOLLE II SYSTEM

Discover MOLLE II load-bearing gear issued for real deployments, not just range days. Every FLC vest, frame, rucksack, and pouch here is genuine USGI MOLLE II issue, no commercial knockoffs, no MOLLE-style substitutes. Whether you are rebuilding a full Rifleman setup or just need one replacement pouch, you will find the exact MOLLE II piece you are after. From the FLC vest and frame to the Large Rucksack and every pouch in between, every item is inspected and graded under our 4-point condition system, so you know exactly what you are getting before you buy.
smiths.parachute.stars.50

FIGHTING LOAD CARRIER (FLC) VESTS

The base of every MOLLE II configuration, a one-size-fits-all vest worn over body armor, built to mount mission-specific pouches.
smiths.parachute.stars.50

MOLLE II WAIST PACKS

A multi-purpose pack that clips to the Assault Pack, attaches to the FLC, or runs stand-alone on its own belt, in ACU, Multicam, and Woodland.
smiths.parachute.stars.50

ASSAULT PACKS

2,000 cubic inches with built-in airborne rigging points, in ACU/UCP, OCP/Multicam, Woodland, and limited Desert DCU.
smiths.parachute.stars.50

RUCKSACKS

4,000 cubic inches in the Large Ruck, with two 500 cubic-inch Sustainment Pouches on the sides, plus a Medium Rucksack with frame included.
smiths.parachute.stars.50

RUCKSACK COMPONENTS

Building or replacing a ruck piece by piece, main bags, frames, and molded waist belts, in stock or not.
smiths.parachute.stars.50

MOLLE II POUCHES

Mag pouches, grenade pouches, canteen carriers, sustainment pouches, and IFAK/TQ carriers, all built for the same interlocking MOLLE webbing.

SMITHS SURPLUS & SUPPLY

At Smiths Surplus, we deliver authentic U.S. military gear inspected and graded by hand. Every pack, pouch, and field item is priced for real value, so you know exactly what to expect when it lands on your doorstep. Explore our full range of field-tested surplus and tactical gear today.

INSPECTED & GRADED

USGI MOLLE II MILITARY GEAR

As a trusted U.S. military surplus store, we source genuine MOLLE II issue built to the Army’s own operator’s manual specs. From the FLC vest and frame to the smallest mag pouch, every piece meets our inspection standards before it ships. New to the system? Read how it all fits together.

Your MOLLE II Questions, Answered by Field Experts

Answer: MOLLE II stands for Modular Lightweight Load-Carrying Equipment II. It’s the U.S. Army’s modular load-bearing system, documented in TM 10-8465-236-10, built around interchangeable components: FLC vest, frame, rucksack, assault pack, waist pack, and mission-specific pouches.
Answer: The original MOLLE was fielded in 1997 and replaced ALICE, using PALS webbing to attach pouches. MOLLE II followed with a redesigned frame and a single-bag Large Rucksack with an internal sleeping bag divider, instead of the original two-bag setup. Pouches are largely interchangeable between generations since both use the same PALS webbing, but the FLC vest, frame, and rucksack body are not.
Answer: MOLLE II pouches attach using an interlocking weave: feed the pouch’s attachment strap behind one horizontal row of webbing, then in front of the next, continuing down the full length of the pouch. A single point of contact isn’t secure. The weave needs to run the pouch’s entire height to lock in place.
Answer: The Rifleman set holds up to 12 magazines across three M4 Two-Magazine pouches and two M4 Three-Magazine Side-by-Side pouches, plus two Fragmentation Hand Grenade pouches and two Canteen/General Purpose pouches. All of it mounts to the same FLC vest used across every MOLLE II role.
Answer: MOLLE II remains in wide use and circulation, though the Army has also fielded the Tactical Assault Panel (TAP) as a more modern chest-rig option for some units. Plenty of MOLLE II gear is still field-relevant and fully compatible with PALS-based pouches and accessories.
Answer: The Large Rucksack offers 4,000 cubic inches of main capacity, plus two 500 cubic-inch Sustainment Pouches on the sides. Empty, with frame and straps, it weighs about 8 lbs. The frame and molded waist belt are built to transfer that load to the hips, not just the shoulders.
Answer: Yes. The same PALS webbing that makes MOLLE II modular for soldiers works just as well for civilian use: swap in pouches for ammo, hydration, first aid, or tools depending on whether you’re at the range, in the field, or on a hunt.
Answer: Generally yes, both generations use the same PALS attachment webbing, so pouches usually weave on and lock the same way regardless of which generation they were issued with. What doesn’t interchange is the core chassis: a MOLLE rucksack frame won’t fit a MOLLE II ruck, and vice versa.
smiths surplus logo white

JOIN THE SQUAD

Fast Shipping

Orders ship in 1-2 business days

Easy returns

No forms or RA numbers

Customer Support

A real person will answer

100% Secure Checkout

All prices in USD